The description
Mikrotik RouterOS is the main product of the Linux-based Mikrotik operating system, which, installing on the dedicated hardware of the same company or on standard x86-based computers, turns the hardware into a network router and provides many features additional. such as firewall, VPN service provider and client. In order to improve the performance level of this operating system, each function must be licensed. This company’s application for the Windows operating system is called Winbox, which provides a graphical interface for configuring the router and monitoring its operation. At the same time, RouterOS provides access via telnet, SSH and FTP.
MikroTik RouterOS Features and Functionality:
- Mac-based access for initial setup
- Powerful command-line configuration interface with built-in programming capabilities, accessible via local terminal, serial console, telnet, and ssh
- Use the API to configure and monitor your applications
- Save and load binary configuration backups
- Export and import configuration in readable text format
- Filter by IP address and address range, port and port range, IP protocol, DSCP, IPv6 support
- Virtual routing and forwarding, policy-based routing
- IPv4 dynamic routing protocols including RIP v1/v2, OSPFv2, BGP v4
- IPv6 dynamic routing protocols including RIPng, OSPFv3, BGP
- BFD Bidirectional Send Detection
- Save HTTP proxy server, transparent HTTP proxy
- Bandwidth test, pingflood, packet sniffer, email and SMS tool
- Dynamic DNS Update Tool
- NTP client server and synchronization with the GPS system
- Complete Internet-based installation of PXE-enabled network card and EtherBoot
system required
x86, 65 MB RAM, 600 MHz processor
Pictures
Installation guide
– To use this virtual machine (VM), first unzip the files and then import the OVF template file related to the VM into the virtualization software. For VMware virtual machine
– In order to avoid the MAC address problem, it is suggested to change the MAC address of the network card by pressing the Generate button in the settings.
– If, after launching the VM, you are asked if you copied or moved this machine, answer that it was copied.
– The default username is admin and the password is blank.